Tungsten Carbide Aluminum Roughing End Mill For Stainless Steel Metal
Troubleshooting Tips for working with End Mills
Selecting the right tooling for your material and project will improve the quality of your work and reduce the need for excessive hand-finishing.
The feed rate of the material must be matched to the optimal speed of the end mill.
A 50% reduction in operating speed can double the life span of your end mill.
Choose the correct flute count for the application - proper chip evacuation is crucial as heated cutters can lead to low-quality cutting (burnt material, burred edging and dull tooling).
Use carbide end mills for harder materials and high production applications.
Sometimes extra length end mills are necessary to use, but to combat deflection (bending of the bit) operate at the proper speed and feed rates and always use the most rigid (shortest and widest) end mill available for the application.
Use coolant or compressed air to prevent chip build-up.
Use the whole side of the cutting edges rather than a small portion towards the tip. This will improve the shelf life of your endmill as the heat and work is distributed over a larger surface
Specifications:
B600 corrugated roughing milling cutter series adopt domestic high-quality fine grain tungsten steel material, flexural strength: 3900mpa, grain size: 0.8 μm. There are two categories for aluminum and steel respectively. The roughing milling cutters for steel are coated by imported coating equipment (black / Bronze). The cutter adopts special process design (coarse, medium and fine teeth), especially suitable for aluminum, copper, ordinary medium or low carbon steel, alloy steel and other materials processing, to achieve large margin, fast forward, improve the processing efficiency. With high precision quality control, and full inspection, all B600 series end mills are delivered with 100% qualification rate.
| Raw Material | YL10.2 /K30 |
| WC | 90% |
| Co | 10% |
| TRS | >3900N/mm2 |
| Hardness | >91.5HRA |
| A.O.L | 50mm-150mm |
| Grain size | 0.8 μm |
| Upto | HRC55 |
| Flutes No | 4F |
| Coating | AlTiN or TiSiN |
| Suitable for | Steel,stainless steel,nickel alloy,Titanium alloy,cast iron,plastic and other materials |
Coating:
| Item | AlTiN | TiSiN |
| Hardness(HV): | 3200 | 3600 |
| Thickness(UM): | 2.5-3 | 3 |
| Oxidation Temp(°): | 900 | 1000 |
| frictional Coefficient: | 0.3 | 0.45 |
| Color: | Black | Copper |
Standard Sizes
| Size | Flute Length |
| D3*8*D4*50 | 8 |
| D4*10*50 | 10 |
| D5*13*50 | 13 |
| D5*12*D6*50 | 12 |
| D6*15*50 | 15 |
| D6*18*75 | 18 |
| D6*24*100 | 24 |
| D8*20*60 | 20 |
| D8*24*75 | 24 |
| D8*35*100 | 35 |
| D10*25*75 | 25 |
| D10*40*100 | 40 |
| D12*30*75 | 30 |
| D12*45*100 | 45 |
| D14*40*100 | 40 |
| D16*45*100 | 45 |
| D16*65*150 | 65 |
| D18*45*100 | 45 |
| D20*45*100 | 45 |
| D20*80*150 | 80 |
Product Tags:
|
|
Tungsten Carbide Aluminum Roughing End Mill For Stainless Steel Metal Images
|
